DIY Wooden Curb & Kicker Kit

Two obstacles. More ways to skate.

Build a wooden fingerboard curb and kicker from precision laser-cut parts. Both obstacles use an internal structure inspired by full-size wooden skateparks and are finished with pre-cut 1 mm wooden veneer riding surfaces.

Use the curb flat, turn it on its side for extra height or combine it with the kicker to create an up-curb or down-curb setup. It is approachable enough for learning ollies and first grinds, but versatile enough to stay in your setup as your tricks progress.

Why you’ll love it

• Two separate obstacles with multiple setup options
• Round and angular metal grind edges
• Turn the curb sideways for additional height
• Combine curb and kicker for up-curb and down-curb lines
• Construction inspired by full-size wooden skate ramps
• Pre-cut 1,5 mm wooden veneer riding surfaces
• Anti-slip tape helps keep the obstacles in place
• Made in Germany using materials sourced from the EU

Finished dimensions

Curb: 250 × 100 × 36 mm
Kicker: 120 × 100 × 36 mm

What’s included

• 2 carrier sheets with precision laser-cut 4 mm wooden parts
• One pre-cut 1,5 mm wooden veneer surface for the curb
• One pre-cut 1,5 mm wooden veneer surface for the kicker
• One round metal grind edge
• One angular metal grind edge
• Anti-slip tape
• Printed instructions with QR code for the digital guide

What else do I need?

Only wood glue. No other materials are required. For the first 100 kits, the wood glue is included free as a launch bonus.

Recommended age: 10+
Estimated build time: 1–2 hours, plus glue curing time